FieldWise Calculator

Gravel Calculator

Figure out how many tons of gravel to order for a driveway, path, or drainage project. It also works as a fill dirt calculator, a limestone calculator and a riprap (rip rap) calculator. Enter the area and depth you need to cover and pick your material; these materials are usually sold by the ton, not the yard, so we convert both ways.

Volume needed...
Gravel needed...
Estimated cost...

Understanding the inputs

length
The longer side of the area you are covering, in feet.
width
The shorter side of the area you are covering, in feet.
depth
Walkways typically need 2 to 3 inches of gravel; driveways usually need 4 to 6 inches for a stable base.
material
Different materials pack and weigh differently per cubic yard, which changes how many tons you need for the same area.
price
Price per ton varies by material, region, and delivery distance.

Gravel density by material (approximate, per cubic yard)

MaterialWeight per cubic yard
Crushed stone (generic)~1.4 tons
Pea gravel~1.5 tons
Crushed limestone~1.35 tons
River rock~1.5 tons
Fill dirt~1.25 tons
Riprap~1.4 tons

Frequently asked questions

How much gravel do I need for a driveway?

Most gravel driveways use 4 to 6 inches of depth for a stable base. Measure the driveway's length and width, enter your chosen depth, and this calculator converts that volume into tons, which is how gravel suppliers usually sell and deliver it.

Why is gravel sold by the ton instead of the yard?

Gravel weight varies by material and moisture content, so suppliers price and deliver it by weight for consistency. A cubic yard of pea gravel weighs a different amount than a cubic yard of crushed limestone, which is why the material you pick changes the tons needed for the same area.

How do I use this as a fill dirt calculator?

Pick "Fill dirt" as the material, then enter the area and depth you need to fill. Fill dirt is usually sold by the cubic yard or the ton, so the results show both. Fill settles after it is placed, so many people add 10 to 15 percent extra.

How much riprap do I need?

Pick "Riprap" as the material and enter the area and depth. Riprap is placed in a thick layer, often 12 inches or more, so check the depth your project or local rules call for before you order.

Can I use this as a limestone calculator?

Yes. Pick "Crushed limestone" as the material, enter your area and depth, and the results show tons and cubic yards. Limestone is about 1.35 tons per cubic yard.

How much does 1 ton of gravel cover?

At about 1.4 tons per cubic yard for crushed stone, one ton is roughly 0.71 cubic yards. That covers about 115 square feet at 2 inches deep, or about 58 square feet at 4 inches deep.

How much is gravel a ton?

Gravel prices per ton vary by material, region and delivery distance. This calculator uses $50 per ton as a placeholder, so enter your supplier's price to see your own total.

How many yards of material do I need?

Multiply the length by the width (in feet) and by the depth (in feet), then divide by 27 to get cubic yards. The calculator does this and also converts the volume to tons for your chosen material. The cubic yards calculator gives yards for any rectangle or circle.

Related calculators