Roofing Calculator
Get an instant roof estimate from your house size or your roof area. This roofing estimate calculator turns the footprint and pitch into roof square footage, then into roofing squares, bundles of shingles, shingle cost and a typical installed price range. Add a waste allowance, because you always lose some shingles to cuts, hips and valleys.
Understanding the inputs
- length
- The length of the house footprint (the walls, not the roof), in feet.
- width
- The width of the house footprint, in feet. For an L-shaped house, add the roof sections together using the roof area tab.
- overhang
- How far the roof sticks out past the walls on each side, in feet. One foot is common; use 0 to ignore it.
- rise
- Roof pitch as inches of rise per 12 inches of run. A 6/12 roof rises 6 inches for every foot. Use the roof pitch calculator if you only know the angle.
- roofArea
- The total roof surface in square feet, not the floor area of the house.
- waste
- Allow 10% for a simple gable roof, 15% for a hip roof or one with valleys, and 20% for a complex roof with many dormers and cuts.
- shingle
- Both types are sold in bundles, usually 3 per roofing square. Architectural shingles cost more and last longer.
- bundlePrice
- The price of one bundle of shingles at your supplier. The default is a rough placeholder, so enter your own quote.
Roof pitch multiplier: roof area from the footprint
| Pitch | Multiplier | Roof area for a 1,000 sq ft footprint |
|---|---|---|
| 4/12 | 1.054 | 1,054 sq ft |
| 5/12 | 1.083 | 1,083 sq ft |
| 6/12 | 1.118 | 1,118 sq ft |
| 7/12 | 1.158 | 1,158 sq ft |
| 8/12 | 1.202 | 1,202 sq ft |
| 9/12 | 1.250 | 1,250 sq ft |
| 10/12 | 1.302 | 1,302 sq ft |
| 12/12 | 1.414 | 1,414 sq ft |
Frequently asked questions
How do you figure out the square footage of a roof?
Multiply the footprint of the house, including overhangs, by the pitch multiplier. A 42 ft by 32 ft footprint is 1,344 square feet, and at a 6/12 pitch the multiplier is 1.118, so the roof is about 1,503 square feet. The table above lists the multiplier for common pitches. If you only know the angle, the roof pitch calculator converts it to rise per 12 inches.
How much square footage is in a bundle of shingles?
Most shingle bundles cover about 33 square feet, because 3 bundles make one roofing square of 100 square feet. Some products use 4 or 5 bundles per square, so check the label before you order.
How many bundles of shingles do I need?
Divide the roof area by 100 to get squares, add the waste allowance, and multiply by 3. A 15 square roof with 10% waste is 16.5 squares, which is 50 bundles when you round up.
What is a roofing square?
A roofing square is 100 square feet of roof surface. Shingles, underlayment and labor are all priced per square, so this calculator reports squares along with bundles.
How much waste should I allow for roofing?
Use about 10% for a plain gable roof, 15% for a hip roof or one with valleys, and 20% or more for a complex roof. Starter strips and ridge caps are bought separately.
How do I get an instant roof estimate?
Enter your house length, width and pitch on the first tab to see the roof area, squares and a typical installed price range for asphalt shingles. For a quote that matches your roof, compare it with bids from local roofers and the roof replacement cost calculator.